The Skutt EnviroLink

WHAT IS THE ENVIROLINK?

The EnviroLink is an electrical switching device that can be controlled by an automatic kiln to determine when a vent turns on and off.

WHO CAN BENEFIT FROM AN ENVIROLINK?

• Teachers - Even though most vents do not draw a lot of energy, most teachers do not feel comfortable letting the fan motor run all weekend or even overnight. The EnviroLink will shut the vent off when the program is complete or when the kiln reaches a specific temperature. Since it works with ConeFire Mode, it is very easy to program.

• Potters - Crystal Glazes and Cone 6 Glazes can be very sensitive to cooling rates. Artists can now use the Ramp/Hold programming mode to control whether the kiln vent is on for each segment of the firing program.

• Glass Artist - Artists who fire glass want to cool quick and hold steady. With the EnviroLink they can program the vent to come on when crash cooling and then turn off during annealing when they are trying to hold the temperature steady.

WHAT KILNS WILL IT WORK ON?
The EnviroLink will work on any Skutt KilnMaster or GlassMaster Kiln which was manufactured after January of 2001. If you are not sure how old your kiln is write down your serial number along with the model number, voltage and phase and call Skutt.The EnviroLink will also work with many competitive brands. Call your particular kiln manufacturer to find out.

WHAT OTHER VENTS WILL IT CONTROL?
It will control the EnviroVent, The EnviroVent 2 and any other DownDraft Vent that draws less than 12 Amps. Consult with your Vent manufacturer to be sure.

WHERE CAN I PURCHASE ONE?
Your local distributor should have one in stock if not they can have one drop shipped right to your door.

.
Download the EnviroLink Manual including information on installation and programming

Read more about Venting FAQ's